| Dimensions and weights | |
|---|---|
| Length approx. | 1935 mm |
| Width/depth approx. | 780 mm |
| Height approx. | 1740 mm |
| Weight approx. | 765 kg |
Roll over image to zoom in
TREIPINK OPTIturn TM 4010
10,495.00€
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 5
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Gears and shafts hardened and ground, running in an oil bath in precision bearings
- Tailstock with hardened and ground quill
- DC 24 Volt – electrics
- All gears of the feed gear made of steel, hardened and ground, shafts on needle bearings All components are lubricated in an oil bath
- Right / left rotation on bed sled switchable
- Safety handwheels with release function in the X and Z axis
- Emergency stop device
- Perfectly concentric Main spindle guarantees high load capacity thanks to mounted precision tapered roller bearings
- Hinged chip compartment for easy chip removal from the front
- Machine base in stable steel construction
- Coolant pump with coolant reservoir and level indicator. Removable container for easy cleaning
- With safety device against simultaneous operation of threading and feed mechanism
- Handwheels, decoupled and tested to EN 23125
- Switch with life cycle calculation tested according to EN ISO 13849
- LED machine lamp in chip protection
- Motor electrically braked
- Three-jaw chuck Ø 200 mm, No. 5 in the standard scope of delivery
- User-friendly membrane keyboard
- Two-channel right-left switch, tested to EN 23125
Tehnilised andmed
| Cooling lubricant system | |
|---|---|
| Coolant pump output | 100 W |
| Electrical connections | |
|---|---|
| Total rated value | 3,0 kW |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,014 – 0,38 mm/rev |
| Number of longitudinal feeds | 26 |
| Flat feed range | 0,052 – 1,392 mm/rev |
| Number of flat feeds | 32 |
| Pitches | |
|---|---|
| Metric pitch | 0,4 – 7 mm/rev |
| Number of metric pitches | 32 |
| Imperial pitch | 56 – 4 Gg/1″ |
| Number of imperial pitches | 31 |
| Speed range | |
|---|---|
| Number of gears | 8 |
| Speed range | 70 – 2000 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No.5 |
| Spindle bore/rod passage diameter | 53 mm |
| Spindle cone | MT 6 |
| Tool holder | SWH 3-E |
| Tailstock | |
|---|---|
| Chuck | MT 4 |
| Quill stroke | 110 mm |
| Tool clamping | |
|---|---|
| Tool holder chuck size | 16 mm |
| Travel | |
|---|---|
| Travel upper slide | 98 mm |
| Travel cross slide | 185 mm |
| Travel carriage saddle | 850 mm |
| Work areas | |
|---|---|
| Max. height | 200 mm |
| Max. width | 1000 mm |
| Swing diameter above machine bed | 400 mm |
| Swing diameter above planing slide | 250 mm |
| Explanation Swing diameter above planing slide | Please note that when installing third-party lathe chucks or faceplates to achieve the specified technically possible turning diameter, operator modifications are required. |
Lisad
