| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
Roll over image to zoom in
TREIPINK OPTIturn TM 3310V
9,900.00€
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- DC 24 volt electrical system
- Smooth running feed gear with rounded gears running in oil bath
- Handwheels with adjustable fine scaling 0.04 / 0.02 mm
- Safety handwheels with disengaging function according to EN23125 in X- and Z-axis
- Right/left rotation switchable on bed slide
- Two-channel right/left switch, tested according to EN 23125
- Switch rod on the bed slide for selection of longitudinal or cross feed
- Switch with life cycle calculation tested according to EN ISO 13849
- Hardened main spindle mounted in adjustable, precise taper roller bearings
- Machine base in stable steel construction
- Motor protection switch
- Main motor electrically braked
- Quadruple steel holder
- Emergency stop impact switch right and left
- Three-jaw lathe chuck in standard scope of delivery
- Digital position indicator DPA 32
- Inverter drive with integrated EMC filter
- Low-noise motor operation due to high pulse frequency
- Fast current limiting (FCL) for trouble-free operation with sudden
- operation during sudden load surges
Tehnilised andmed
| Dimensions and weights | |
|---|---|
| Max. height | 1590 (DPA) mm |
| Length approx. | 1760 mm |
| Width/depth approx. | 745 mm |
| Height approx. | 1320 mm |
| Weight approx. | 469 kg |
| Feed | |
|---|---|
| Longitudinal feed range | 0.02 – 0.4 mm/rev |
| Number of longitudinal feeds | 24 |
| Flat feed range | 0.01 – 0.2 mm/rev |
| Number of flat feeds | 32 |
| Pitches | |
|---|---|
| Metric pitch | 0.4 – 10 mm/rev |
| Number of metric pitches | 29 |
| Imperial pitch | 56 – 4 Gg/1″ |
| Speed range | |
|---|---|
| Number of gears | 6 Steps |
| Speed range | 14 – 2800 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 4 |
| Spindle bore/rod passage diameter | 38 mm |
| Spindle cone | MT 5 |
| Tool holder max. chuck height | 16 mm |
| Tailstock | |
|---|---|
| Chuck | MT 5 |
| Quill stroke | 100 mm |
| Quill diameter | 38 mm |
| Travel | |
|---|---|
| Travel upper slide | 90 mm |
| Travel cross slide | 168 mm |
| Travel carriage saddle | 850 mm |
| Work areas | |
|---|---|
| Max. height | 165 mm |
| Max. width | 1000 mm |
| Swing diameter above machine bed | 330 mm |
| Swing diameter above planing slide | 216 mm |
| Bed width | 190 mm |
Lisad
