| Dimensions and weights | |
|---|---|
| Length approx. | 2765 mm |
| Width/depth approx. | 1065 mm |
| Height approx. | 1550 mm |
| Weight approx. | 1810 kg |
Roll over image to zoom in
TREIPINK OPTIturn TH 4615D
21,350.00€
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Hardened and ground Z-axis guideway
- Precisely crafted sled
- Handwheels with adjustable fine scale 0.04 / 0.02 mm
- Quadruple tool holder
- All guides can be adjusted by wedge strips
- Waves, wheels and main spindle running in oil bath
- Adjustment range upper slide ± 90°
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings
- Fast-switching feed gear in a closed design, gears and shafts hardened and ground in an oil bath in precision bearings running
- Handwheels decoupled and tested according to EN 23125
- Two-channel right-left switch tested to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- Right / left rotation on bed carriage via switching spindle switchable
- Mechanical longitudinal feed-out shut-off of the bed carriage with four adjustable eccentrics leading spindle
- Emergency stop device with foot control
- Safety handwheels with release function in the X and Z axis
- Adjustable scale of the threaded clock
- Central lubrication in the bed slide
- Tailstock for taper turning ± 10 mm adjustable
- Tailstock quill and hand wheel with adjustable fine scale 0.025 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Strongly ribbed prism bed, induction hardened and precision ground from gray cast iron
- Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
- Large dimensioned chip guard with integrated LED machine lamp
- Quick change steel holder SWH 5-B
Tehnilised andmed
| Cooling lubricant system | |
|---|---|
| Coolant pump output | 125 W |
| Electrical connections | |
|---|---|
| Total rated value | 5.8 kW |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,031 – 1,7 mm/rev |
| Number of longitudinal feeds | 42 |
| Flat feed range | 0,014 – 0,784 mm/rev |
| Number of flat feeds | 42 |
| Pitches | |
|---|---|
| Metric pitch | 0,1 – 14 mm/rev |
| Number of metric pitches | 41 |
| Imperial pitch | 112 – 2 Gg/1″ |
| Number of imperial pitches | 41 |
| Diametrical pitch | 4 – 112 DPI |
| Number of diametrical pitches | 50 |
| Modular thread pitch | 0,1 – 7 mm/rev |
| Number of modular thread pitches | 34 |
| Speed range | |
|---|---|
| Number of gears | 12 |
| Speed range | 25 – 2000 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 6 |
| Spindle bore/rod passage diameter | 58 mm |
| Spindle cone | MT 6 |
| Tool holder max. chuck height | 25 mm |
| Tailstock | |
|---|---|
| Chuck | MT 4 |
| Quill stroke | 130 mm |
| Quill diameter | 60 mm |
| Travel | |
|---|---|
| Travel upper slide | 125 mm |
| Travel cross slide | 285 mm |
| Travel carriage saddle | 1305 mm |
| Work areas | |
|---|---|
| Max. height | 230 mm |
| Max. width | 1560 mm |
| Swing diameter above machine bed | 460 mm |
| Swing diameter in bed bridge | 690 mm |
| Swing diameter above planing slide | 270 mm |
| Turning length in bed bridge | 240 mm |
| Bed width | 300 mm |
Lisad
