| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
Roll over image to zoom in
TREIPINK OPTIturn TH 4010V
17,990.00€
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 5
- Precisely crafted sled
- Handwheels with adjustable fine scale 0.04 / 0.02 mm
- Quadruple tool holder
- All guides can be adjusted by wedge strips
- Adjustment range upper slide ± 90 °
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Main spindle running in oil bath
- Gear wheels smooth, hardened and ground
- Gears and shafts hardened and ground, running in an oil bath in precision bearings
- Handwheels decoupled and tested according to EN 23125
- Two-channel right-left switch tested to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- DC 24 Volt – electrics
- Lockable main switch
- Right / left rotation on bed sled switchable
- Safety handwheels with release function in the X and Z axis
- Tailstock for taper turning ± 10 mm adjustable
- Tailstock quill and hand wheel with adjustable fine scale 0.025 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Strongly ribbed prism bed, induction hardened and precision ground from gray cast iron
- Extractable chip tray with guide rails
- Emergency stop device with foot control
- Machine base with 3 panels (no compartments)
- Coolant system
- LED machine lamp in chip protection
- Motor protection switch
- Digital position indicator DPA21
- User-friendly membrane keypad, splash-proof, closed and glare-free
- Glass scales
- Siemens Sinamics Frequency Inverter / Safety Integrated
- Quick-change steel holder 3-E
- Steel holder 20 x 100 type D for square chisels
Tehnilised andmed
| Dimensions and weights | |
|---|---|
| Length approx. | 1920 mm |
| Width/depth approx. | 740 mm |
| Height approx. | 1555 mm |
| Weight approx. | 780 kg |
| Feed | |
|---|---|
| Longitudinal feed range | 0,043 – 0,653 mm/rev |
| Number of longitudinal feeds | 48 |
| Flat feed range | 0,015 – 0,206 mm/rev |
| Number of flat feeds | 48 |
| Pitches | |
|---|---|
| Metric pitch | 0,4 – 7 mm/rev |
| Number of metric pitches | 42 |
| Imperial pitch | 70 – 4 Gg/1″ |
| Number of imperial pitches | 42 |
| Speed range | |
|---|---|
| Number of gears | 2 |
| Speed range | 30 – 3000 min¯¹ |
| Speed control | electronically adjustable |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 5 |
| Spindle bore/rod passage diameter | 52 mm |
| Spindle cone | MT 6 |
| Tool holder max. chuck height | 16 mm |
| Standards and certifications | |
|---|---|
| Standard | DIN EN 55011 |
| EMC level | C3 |
| Tailstock | |
|---|---|
| Chuck | MK 3 |
| Quill stroke | 130 mm |
| Quill diameter | 45 mm |
| Travel | |
|---|---|
| Travel upper slide | 100 mm |
| Travel cross slide | 195 mm |
| Travel carriage saddle | 750 mm |
| Work areas | |
|---|---|
| Max. height | 205 mm |
| Max. width | 1000 mm |
| Swing diameter above machine bed | 410 mm |
| Swing diameter above planing slide | 255 mm |
| Bed width | 206 mm |
Lisad
