| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
Roll over image to zoom in
TREIPINK OPTIturn TH 3610D
8,450.00€
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 5
- Precisely crafted sled
- Handwheels with adjustable fine scale 0.04 / 0.02 mm
- Quadruple tool holder
- All guides can be adjusted by wedge strips
- Main spindle running in oil bath
- Gear wheels smooth, hardened and ground
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Gears and shafts hardened and ground, running in an oil bath in precision bearings
- Handwheels decoupled and tested according to EN 23125
- Safety handwheels with release function in the X and Z axis
- Two-channel right-left switch tested to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- Motor protection switch, lockable main switch
- Right / left rotation on bed sled switchable
- Leading spindle
- Tailstock for taper turning ± 10 mm adjustable
- Tailstock quill and hand wheel with adjustable fine scale 0.025 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Strongly ribbed prism bed, induction hardened and precision ground
- Machine base with tool compartments on both sides
- Emergency stop device with foot control
- Extractable chip tray with guide rails
- LED machine lamp integrated in chip protection
- Digital position indicator DPA 21
- User-friendly membrane keypad, splash-proof, closed and glare-free
- glass scales
Tehnilised andmed
| Dimensions and weights | |
|---|---|
| Length approx. | 1930 mm |
| Width/depth approx. | 725 mm |
| Height approx. | 1350 mm |
| Weight approx. | 570 kg |
| Feed | |
|---|---|
| Longitudinal feed range | 0,052 – 1,392 mm/rev |
| Number of longitudinal feeds | 32 |
| Flat feed range | 0,014 – 0,38 mm/rev |
| Number of flat feeds | 32 |
| Pitches | |
|---|---|
| Metric pitch | 0,4 – 7 mm/rev |
| Number of metric pitches | 26 |
| Imperial pitch | 56 – 4 Gg/1″ |
| Number of imperial pitches | 34 |
| Speed range | |
|---|---|
| Number of gears | 8 |
| Speed range | 70 – 2000 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 5 |
| Spindle bore/rod passage diameter | 52 mm |
| Spindle cone | MT 6 |
| Tool holder max. chuck height | 16 mm |
| Tailstock | |
|---|---|
| Chuck | MK 3 |
| Quill stroke | 120 mm |
| Quill diameter | 42 mm |
| Travel | |
|---|---|
| Travel upper slide | 100 mm |
| Travel cross slide | 170 mm |
| Travel carriage saddle | 840 mm |
| Work areas | |
|---|---|
| Max. height | 180 mm |
| Max. width | 980 mm |
| Swing diameter above machine bed | 356 mm |
| Swing diameter above planing slide | 225 mm |
| Bed width | 187 mm |
Lisad
