| Dimensions and weights | |
|---|---|
| Work table height | 800 mm |
| Length approx. | 3875 mm |
| Width/depth approx. | 1950 mm |
| Height approx. | 2190 mm |
Roll over image to zoom in
Lintsaag Metallkraft HMBS 440 HA CALIBER
45,690.00€
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Two-column guided bandsaw for sawing solid bars and bar profiles
- Mitsubishi FX 5 control with easy operation via 4.3″ touch screen
- Cutting movement via hydraulic cylinders
- With BRP (cutting feed control): when a set ampere limit is exceeded, the feed motion is stopped while the saw band continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing operation is resumed
- Robust machine body and smallest possible distances between saw band, machine guide and workpiece minimize vibrations for highest sawing performance
- Infinitely variable cutting speed from 15 – 150 m/min
- Saw band is driven by bevel gear, asynchronous motor and frequency converter
- Clamping of the material in front of and behind the cut by two-part vice
- Pressure adjustment of the hydraulic vice tension via control valve with manometer
- Saw blade inclination of 7° and hydraulic saw blade tensioning increase the service life of the saw blade
- Front band guide automatically moves parallel to the movable vice jaw
- Electrically driven chip clearing brush
- Emulsion cooling with liquid distribution into the saw band guides and directly into the cutting channel
- More powerful motor optionally available
Tehnilised andmed
| Cutting ranges | |
|---|---|
| 0° round (full material) | 440 mm |
| 0° rectangle horizontal (hollow) | 460 x 400 mm |
| 0° bundle (pipe) | 460 x 400 mm |
| Electrical Data | |
|---|---|
| Engine power hydraulic pump | 0.75 kW |
| Engine power coolant pump | 0.12 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Machine data | |
|---|---|
| Saw band speed(s) | 15 -150 m/min |
| Speed levels | Infinitely adjustable |
| Saw band length | 5360 mm |
| Saw band width | 34 mm |
| Saw band thickness | 1.1 mm |
| Cutting angle | 7 ° |
| Material feed | |
|---|---|
| Cut-off length min. | 10 mm |
| Material diameter min. | 10 mm |
| Min. residual workpiece length | 30 mm |
Lisad
