| Dimensions and weights | |
|---|---|
| Length approx. | 2305 mm |
| Width/depth approx. | 2260 mm |
| Height approx. | 1780 mm |
| Weight approx. | 780 kg |
Roll over image to zoom in
Lintsaag Metallkraft BMBS 230 x 280 CNC-G
18,519.00€
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- For sawing tubes and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastics
- Miter adjustment at the front, thus better handling with attached roller conveyor
- Bearing mounted turntable
- Stepless adjustment of belt speed
- Robust tape guides with adjustable HM plates for a precise cut
- Longer service life of saw blade due to saw arm inclination of 25°
- Cooling system next to saw blade guides
- BRP saw blade monitoring stops the feed of the saw frame due to chips in the cutting channel if the saw band motor is subjected to too much stress; after the chips are removed by the running saw band, the feed is automatically resumed
- Electromechanical monitoring of saw blade tension, in case of deviations a microswitch shuts down the machine
- Chip cleaning brush for optimal cleaning and maintenance of the saw blade
- Hydraulic vice
- With swiveling control panel
- Cut scan function with integrated pushbutton
How the semi-automatic works:
- Automatic workpiece clamping after the start of the cutting cycle
- Execution of the saw cut with the selected belt speed
- Independent stop of the lowering movement and of the saw blade in the lower end position
- Independent return of the saw arm to its upper end position
- Vise opens automatically
- Operator only has to move the material
Tehnilised andmed
| Cutting ranges | |
|---|---|
| 0° round (pipe) | 230 mm |
| 0° round (full material) | 230 mm |
| 0° rectangle horizontal (hollow) | 280 x 200 mm |
| 0° bundle rectangle vertical (hollow) | 280 x 120 mm |
| -45° round (pipe) | 180 mm |
| -45° round (full material) | 180 mm |
| -45° rectangle horizontal (hollow) | 180 x 170 mm |
| -60° round (pipe) | 110 mm |
| -60° round (full material) | 110 mm |
| -60° rectangle horizontal (hollow) | 100 x 70 mm |
| Electrical Data | |
|---|---|
| Engine power hydraulic pump | 0,85 kW |
| Engine power coolant pump | 0.09 kW |
| Absorbed power | 3.84 kW |
| Engine efficiency class | IE2 |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Machine data | |
|---|---|
| Saw band speed(s) | 20 – 100 m/min |
| Saw band length | 2720 mm |
| Saw band width | 27 mm |
| Saw band thickness | 0.9 mm |
| Cutting angle | 0 – 60 ° |
| Material feed | |
|---|---|
| Speed | 2 m/min |
| Material feed max. | 500 mm |
| Material feed min. | 3 mm |
| Table height material feed | 800 mm |
| Cut-off length min. | 3 mm |
| Material diameter min. | 40 mm |
| Min. residual workpiece length Semi-automatic | 30 mm |
| Min. remaining workpiece length automatic | 140 mm |
Lisad
