| Dimensions and weights | |
|---|---|
| Length approx. | 1410 mm |
| Width/depth approx. | 600 mm |
| Height approx. | 1750 mm |
| Weight approx. | 235 kg |
Roll over image to zoom in
Lintsaag Metallkraft BMBS 220 x 250 H-G
4,290.00€
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
- Miter adjustment from the front, therefore better handling with attached roller conveyor
- For sawing eg stainless steel, tool steel, hollow profiles and solid materials
- Two-pole drive motor enables sawing speeds of 30 and 65 m/min
- Monitoring of saw blade tension electromechanically via microswitch
- When lifting the saw arm, the lowering cylinder locks in the upper position via the solenoid valve – an additional shut-off on the cylinder is not required
- Saw arm tilted by 25°, thus longer blade life
- Robust belt guides with adjustable carbide plates for a precise cut
- After completion of the cutting process, the saw blade automatically stops in the lower end position
- Lowering the saw arm by gravity or manually
- With infinitely adjustable, consistent saw arm lowering speed via hydraulic cylinder
- Vice with quick clamping device
Tehnilised andmed
| Cutting ranges | |
|---|---|
| 0° round (pipe) | 220 mm |
| 0° round (full material) | 120 mm |
| 0° rectangle horizontal (hollow) | 230 x 150 mm |
| 0° bundle (pipe) | 230 x 120 mm |
| -45° round (pipe) | 160 mm |
| -45° round (full material) | 85 mm |
| -45° rectangle horizontal (hollow) | 160 x 90 mm |
| -60° round (pipe) | 90 mm |
| -60° round (full material) | 55 mm |
| -60° rectangle horizontal (hollow) | 90 x 90 mm |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Machine data | |
|---|---|
| Saw band speed(s) | 30 / 65 m/min |
| Speed levels | 2 |
| Saw band length | 2450 mm |
| Saw band width | 27 mm |
| Saw band thickness | 0.9 mm |
| Material feed | |
|---|---|
| Table height material feed | 930 mm |
Lisad
