| Dimensions and weights | |
|---|---|
| Length approx. | 1360 mm |
| Width/depth approx. | 1150 mm |
| Height approx. | 2080 mm |
| Weight approx. | 760 kg |
Roll over image to zoom in
FREESPINK OPTIMILL MT 50E
9,090.00€
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
| Cooling lubricant system | |
|---|---|
| Coolant pump(s) drive power | 40 W |
| Drilling/milling head | |
|---|---|
| Drill-mill head tilt range | ± 45 ° |
| Drilling/milling output | |
|---|---|
| Max. size milling head | 63 mm |
| Max. size shaft milling cutter | 25 mm |
| Drilling performance steel (S235JR) | 30 mm |
| Continuous drilling performance steel (S235JR) | 25 mm |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Milling table horizontal | |
|---|---|
| Table length | 1000 mm |
| Table width | 240 mm |
| Min. clearance vertical spindle – milling table | 60 mm |
| Max. clearance vertical spindle – milling table | 360 mm |
| T-groove size | 14 mm |
| T-groove number | 4 |
| Rotation | ± 45 ° |
| Max. load bearing capacity | 150 kg |
| Travel | |
|---|---|
| X axis manual | 580 mm |
| Y axis manual | 230 mm |
| Z axis manual | 320 mm |
| X axis automatic | 500 mm |
| Y axis automatic | 150 mm |
| Vertical spindle | |
|---|---|
| Reach | 250 – 650 mm |
| Spindle chuck | SK 40 DIN 2080 |
| Speed range | 115 – 1750 min¯¹ |
| Number of gears | 8 |
| Tightening bar | M16 |
| Vertical spindle normal operation | 0.85 / 1.5 kW |
| Quill stroke | 120 mm |
Tehnilised andmed
Lisad
