| Drilling/milling head | |
|---|---|
| Drill-mill head tilt range | ± 30 ° |
Roll over image to zoom in
FREESPINK OPTIMILL MH35V
5,650.00€
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
| Dimensions and weights | |
|---|---|
| Length approx. | 850 mm |
| Width/depth approx. | 1030 mm |
| Height approx. | 1340 mm |
| Weight approx. | 318 kg |
| Drilling/milling output | |
|---|---|
| Max. size milling head | 80 mm |
| Max. size shaft milling cutter | 28 mm |
| Drilling performance steel (S235JR) | 32 mm |
| Continuous drilling performance steel (S235JR) | 28 mm |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Milling table horizontal | |
|---|---|
| Table length | 750 mm |
| Table width | 210 mm |
| Max. clearance vertical spindle – milling table | 440 mm |
| T-groove size | 12 mm |
| T-groove number | 3 |
| T-groove spacing | 63 mm |
| Max. load bearing capacity | 170 kg |
| Standards and certifications | |
|---|---|
| Standard | DIN EN 55011 |
| EMC level | C2 |
| Travel | |
|---|---|
| X axis manual | 450 mm |
| Y axis manual | 200 mm |
| Z axis manual | 460 mm |
| Vertical spindle | |
|---|---|
| Reach | 215 mm |
| Spindle chuck | BT 30 |
| Speed range | 50 – 3260 min¯¹ |
| Number of gears | 6 |
| Speed control | electronic |
| Quill diameter | 68 mm |
| Quill stroke | 90 mm |
Tehnilised andmed
Lisad
