| Dimensions and weights | |
|---|---|
| Length approx. | 1400 mm |
| Width/depth approx. | 1450 mm |
| Height approx. | 2150 mm |
| Weight approx. | 950 kg |
Roll over image to zoom in
FREESPINK OPTIMILL MF 2-V
18,350.00€
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
Multifunktsionaalne puur- freespink, töölaua automaat ettenihkega X ja Y teljel,
spindli etteande ja diginäidikutega 3-l teljel DPA21.
Elektroonilise sujuvalt muudetava kiirusega ajamiga “Made in EU” .
- Heavy, solid design made of high-quality Meehanite cast iron
- Drilling-milling head tiltable by ± 45°
- High concentricity due to tapered roller bearing, measured smaller than 0.01 mm in the quill
- Automatic quill feed
- Adjustable drilling depth stop with millimeter scale, front readable
- Right / left rotation for thread cutting
- X- and Z-axis with adjustable dovetail guide
- Coolant system
- Height-adjustable protective screen with micro-switch, against flying chips and parts, for maximum protection of the user
- Massive and large-dimensioned XY stage, precisely surface-finished with T-slots
- Y-axis with adjustable dovetail guideSiemens SINAMICS G110M converter
- Especially EMV compatible due to compact design
- Internal security features
- Made in EU
OPTI control panel:
- Integrated control panel
- Integrated digital position indicator DPA 21 with speed display
Tehnilised andmed
| Cooling lubricant system | |
|---|---|
| Coolant pump(s) drive power | 100 W |
| Drilling/milling head | |
|---|---|
| Drill-mill head tilt range | ± 45 ° |
| Mill head swivel range | ± 90 ° |
| Drilling/milling output | |
|---|---|
| Max. size milling head | 76 mm |
| Max. size shaft milling cutter | 18 mm |
| Drilling performance steel (S235JR) | 24 mm |
| Continuous drilling performance steel (S235JR) | 20 mm |
| Electrical connections | |
|---|---|
| Total rated value | 2,2 kW |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Milling table horizontal | |
|---|---|
| Table length | 1244 mm |
| Table width | 230 mm |
| Min. clearance vertical spindle – milling table | 57 mm |
| Max. clearance vertical spindle – milling table | 463 mm |
| T-groove size | 16 mm |
| T-groove number | 3 |
| T-groove spacing | 63 mm |
| Max. load bearing capacity | 230 kg |
| Standards and certifications | |
|---|---|
| Standard | DIN EN 55011 |
| EMC level | C2 |
| Travel | |
|---|---|
| X axis manual | 800 mm |
| Y axis manual | 305 mm |
| Z axis manual | 406 mm |
| X axis automatic | 730 mm |
| Y axis milling head | 320 mm |
| Vertical spindle | |
|---|---|
| Reach | 213 – 533 mm |
| Spindle chuck | ISO 40 DIN 2080 |
| Speed range | 10 – 5100 min¯¹ |
| Number of gears | 6 |
| Speed control | electronically adjustable |
| Vertical spindle normal operation | 1,5 kW |
| Quill stroke | 127 mm |
| Spindle sleeve feed | 0.04 / 0.08 / 0.15 mm/rev |
Lisad
