| Dimensions and weights | |
|---|---|
| Length approx. | 1600 mm |
| Width/depth approx. | 930 mm |
| Height approx. | 2110 mm |
| Weight approx. | 495 kg |
Roll over image to zoom in
FREESPINK OPTIMILL MB 4PV
9,050.00€
Kirjeldus
Tehnilised andmed
Lisad
Kirjeldus
| Cooling lubricant system | |
|---|---|
| Coolant pump(s) drive power | 100 W |
| Drilling/milling head | |
|---|---|
| Drill-mill head tilt range | ± 45 ° |
| Drilling/milling output | |
|---|---|
| Max. size milling head | 63 mm |
| Max. size shaft milling cutter | 26 mm |
| Drilling performance steel (S235JR) | 24 mm |
| Continuous drilling performance steel (S235JR) | 20 mm |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Milling table horizontal | |
|---|---|
| Table length | 800 mm |
| Table width | 240 mm |
| Max. clearance vertical spindle – milling table | 420 mm |
| T-groove size | 14 mm |
| T-groove number | 3 |
| T-groove spacing | 80 mm |
| Standards and certifications | |
|---|---|
| Standard | DIN EN 55011 |
| EMC level | C2 |
| Travel | |
|---|---|
| X axis manual | 560 mm |
| Y axis manual | 195 mm |
| Z axis manual | 350 mm |
| X axis automatic | 480 mm |
| Vertical spindle | |
|---|---|
| Reach | 258 mm |
| Spindle chuck | MT 4 |
| Speed range | 60 – 2760 min¯¹ |
| Number of gears | 2 |
| Speed control | electronic |
| Tightening bar | M 16 |
| Quill diameter | 75 mm |
| Quill stroke | 120 mm |
Tehnilised andmed
Lisad
